Block Mixer

Good maintenance
Humanized large maintenance platforms and stairs are easy for repair and maintenance.
The Reserved water outlet on the mixer is convenient for mixer washing. The entire packing (option)
ensure the normal daily production and maintenance without weather influence.

The use of mixer
1. Before use, the machine should have an empty test. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation. Close the main switch, access the power supply, run the empty test machine.
2. Empty machine test. The mixer can only be put into production without abnormal sound, high heat of bearing gear, etc.
3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and give a thorough inspection.
4. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.
5. Managers should be familiar with the technical performance, internal structure, control structure, and operating principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure.

The Twin-shaft Concrete Mixer can mix all kinds of concrete, meeting many requirement.Alternative parts has long life, easily to repair and operate and so on, feeding height can be desinged according to customer's needed. It can be applied with concrete mixer transport machine and dumping car, working with concrete dosing machine. It is a very good option for all kinds concrete mixing projects.